Rubber scuff marks can be annoying to your car’s beautiful paint job. Every time we hit the road for a weekend race track or the normal workdays,
this challenge becomes unavoidable hence the need to know how to remove rubber scuff marks from car for seamless cruising.
Rubber is a soft compound that rarely scuffs the car’s finish, but only the outer layer of the paint.
As that’s the case, getting rid of the melted rubber from your car is easy with the right supplies and carrying out the actual procedure.
For fresh marks, a slightly damp piece of soft cloth can do away with them if you apply gentle pressure when wiping the area.
But most of the time, you discover already dried black rubber marks on your car paint on arriving home after a busy day.
How to Remove Rubber Scuff Marks From Car
In this article, I’ll share with you five effective methods to remove rubber scuffs from your car’s paint.
|1.||The Tooth Paste Method||Toothpaste is used with a clean, soft piece of cloth.|
|2.||Clay Lubricant||It’s used with a clay bar to restore the sparkling look of your car.|
|3.||WD-40 Multi-Use||Within a few minutes, the multi-purpose lubricant loosens the rubber scuffs.|
|4.||Heavy Duty Tub O’ Towels||It weakens the molecular bond between stain and car surface, making it easy to clean.|
|5.||Magic Eraser Pad||It’s used with a little water, microfiber cloth, and later a spray wax is applied to restore a car’s paint.|
Related Post: How to fix curb scratches on bumper
1. The Tooth Paste Method
Using toothpaste is a simple home exercise with an easy procedure as follows;
Step 1: Clean the scuffed area to avoid dirt and buffing grits that may worsen the paint if rubbed against the car’s body.
Step 2: Take a soft dry cloth and squirt toothpaste on it.
Step 3: Rub against the scuffed area by making circular moves until the marks are no longer visible.
Step 4: Wipe the area with a soft dry cloth to remove the extra toothpaste residue that may have been left.
It’s important to note that this method is highly effective on shallow scuffs that haven’t deeply penetrated the car’s body. Else, contact the body shop.
2. Clay Lubricant
A clay lubricant is abrasive enough to shear off all rubber scuff types to retain your car’s sparkling paint. Perform the following procedure;
Step 1: Wash the scuffed area with a detergent or soap to remove dirt. Rinse the soap and dry the surface with a clean, soft piece of cloth.
Step 2: Spray the clay lubricant and gently rub against the marks with a clay bar. Spray the lubricant over after a few seconds of rubbing to add a fresh clay surface.
Step 3: Wipe the area with a microfiber towel after a few minutes of rubbing until the rubber marks are invisible.
However, the time you would take to restore your car’s paint depends on the depth of the rubber penetration.
3. WD-40 Multi-Use
Although WD-40 Multi-Use is commonly used as a lubricant, it removes light scuff marks and completely restores the car paint. Keenly carry out this procedure;
Step 1: Thoroughly clean the scuffed area to avoid dirt that may worsen the paint job.
Step 2: Apply the WD-40 Multi-Use lubricant and give it a few minutes to react and loosen the scuffed plinths.
Step 3: Wipe the lubricant with a clean, soft piece of cloth to check on the condition of the car’s surface.
Step 4: Repeat the process until the scuffs are no longer visible.
Despite the WD-40 Multi-Use being a lubricant, it has no silicone or other additives that attract dirt particles.
Read Also: How to use radiator stop leak
4. Heavy Duty Tub O’ Towels
The heavy-duty Tub O’ Towels endure tough cleaning of the scuffs. Additives in these poly-blend material-made wipes help break the molecular bond between the stain and the car’s paint.
For best results, carry out the following procedure;
Step 1: Use disposable wipes to wipe away the dirt and rubber scuff marks simultaneously.
Step 2: Once clean, gently wipe the scuffs as the cleaning solution in the wipes does the bulk task.
Step 3: If the wipes are stained, use clean wipes until the marks are dislodged, and the car’s paint shines.
5. Magic Eraser Pad
Magic Eraser Pads are manufactured with melamine foam from a compound known as Formaldehyde-Melamine-sodium Bisulfite Copolymer. This makes it a reliable stain remover for many gearheads.
However, for a magic eraser pad to bring out excellent results, be sure to carry out the following procedure to clean the rubber scuff marks;
Step 1: Add some little water to dampen the pad. Note, making it soaking wet will downgrade its performance.
Step 2: Gently rub over the scuff marks as you observe the reaction. If the pads are stained, change them and repeat the process until the marks disappear.
Step 3: Wipe dry your car’s surface using a microfiber cloth.
Step 4: You can apply Spray Wax to smoothen the car surface when finished.
What Causes Black Scuff Marks on Car?
Several factors contribute to black scuff marks appearing on your car exterior paint;
- First, the marks may occur if your car’s tires heat up due to friction and some melted rubber fly off to the nearby bodywork.
- Secondly, you may have come into contact with another car either at a parking lot or a shopping cart rubs against your car’s lower surface, leaving paint residue.
- Third, an overspeeding car or a bike might overtake you, and their heated tires release some hot rubber residues that fly off to your bodywork.
What Tooth Paste Is Best for Removing Tire Rubber Marks?
Whitening toothpaste is the best for your car’s surface. Due to its grittier texture and mild abrasiveness, it does light polishing and smoothening the vehicle’s exterior surface.
What Are Many Uses of WD-40?
- It can remove bird poop from the car exterior.
- It removes fingerprints from stainless steel appliances.
- It keeps metal surfaces from rusting.
- It removes ink from car marts and fabric-coated car interior.
- It loosens rusted car bolts.
Besides being approved to remove rubber scuff marks from cars, WD-40 Multi-Use is an excellent multi-purpose lubricant that easily performs the above processes.